Telaire 7001 Carbon Dioxide Monitor
CO2 and Temperature Monitor
 The hand held Telaire 7001 Monitor measures Carbon Dioxide and Temperature. The monitor provides stable,
highly accurate readings with its patented dual beam
NDIR technology. The CO2 Monitor features a 0-4 Volt output, large LCD display with push button interface,
quick adjustments for altitude correction, simple toggling between °C and °F temperature readings and runs for 70+ hours
on four AA alkaline batteries or continuously with the
supplied power adapter. The sensor has a CO2 range suitable
for virtually any building (0-10,000 ppm). Click here
for more on monitoring building air.
The CO2 Monitor is also available with a Data Logger as a Kit.
Telaire 7001 CO2 Data Logger Kit
>> (1) Telaire 7001 Carbon Dioxide Monitor (#7001)
>> (1) 4 Channel Data Logger (#U12-012)
>> (1) Cable Connecting Logger to Monitor (#CABLE-C02)
>> (1) HOBOware Lite Software (#BWH-LITE)
NOTE: Large Quantity Discounts available!
Features Specifications Good CO2 Levels Logger Kit
| Description |
Part Number |
Qty 1-9 |
Qty 10+ |
|
| Telaire 7001 Carbon Dioxide (CO2) Monitor |
TELAIRE-7001
|
$449.00 |
$439.00 |
 |
| Telaire CO2 Kit (Includes Telaire Monitor, HOBO U12-012 Logger, Monitor to Logger Cable and HOBOware Lite Software) |
7001D
|
$599.00 |
call |
|
| The CO2 Monitor is compatible with the following HOBO data loggers |
| HOBO U12 4 Channel External Input Data Logger |
U12-006
|
$105.00 |
$99.00 |
|
| HOBO U12 Temp/RH/Light/External Data Logger |
U12-012
|
$130.00 |
$122.00 |
|
| HOBO U12 Temp/RH/2x External Data Logger |
U12-013
|
$130.00 |
$122.00 |
|
| HOBO Data Logger to CO2 Monitor Cables - Required |
| Telaire CO2 Monitor to Data Logger Cable |
Cable-CO2
|
$29.00 |
$27.00 |
|
| The CO2 Monitor is compatible with the following TandD data loggers |
| TandD Wireless Voltage/Pulse Logger |
RVR-52A
|
$259.00 |
call |
|
| TandD 2 Channel Voltage Logger |
VR-71
|
$229.00 |
call |
|
| TandD Data Logger to CO2 Monitor Cables - Required |
| CO2 and Temperature Output Cable with 2 Leads (Limited Quantity - 1 Available) |
2070--U--
|
$35.00
$28.00 |
call |
|
| HOBO Data Logger Software Kits |
| BoxCar Pro 4.3 Software and Serial Cable Kit |
BCP4.3-ON
|
$125.00 |
$118.00 |
|
| BoxCar 3.7 Software and Serial Cable Kit |
BC3.7
|
$55.00 |
$53.00 |
|
| Optional Accessories |
| AA Batteries (Lithium) 4 Pack |
HWSB-LI
|
$20.00 |
$19.00 |
|
Carbon Dioxide Monitor Features
- Monitor Carbon Dioxide and Temperature Readings
- Provides a 0 to 4 Volt Output
- 0 to 10,000 ppm Carbon Dioxide Measurement on Display
- 0 to 4,000 ppm Carbon Dioxide Measurement
- Available as a Kit with Data Logger
Carbon Dioxide Monitor Specifications
| Performance CO2 Channel |
| Measurement Range |
0-4,000 ppm Voltage Output
0-10,000 ppm Display |
| Pressure Dependence |
0.13% of reading per mm Hg
(Corrected via user input for elevation) |
| Sensitivity |
± 1 ppm |
| Repeatability |
± 20 ppm |
| Temperature Dependence |
± 0.1% of reading per °C; or ±
2 ppm per °C;
whichever is greater, referenced to 25°C; |
| Accuracy |
± 50 ppm or 5% of reading, whichever
is greater |
| Annual Drift |
± 20 ppm typical |
| Response Time |
< 60 seconds for 90% of step change |
| Warm-Up Time |
< 60 seconds at 22°C |
| Operating Conditions |
Temperature:32°F to 122°F (0° to 50°C)
Humidity: 0-95% RH, Non-Condensing |
| Storage Temperatures |
-40°F to 140°F (-40°C to 60°C) |
| Calibration Interval |
12 months, offset adjustment using single
gas at 0-1000 ppm CO2. Factory calibration available |
| Temperature Channel |
| Temperature Range |
Voltage Output: 32°F to 104°F (0°C to 40°C)
Display: 32°F to 122°F (0°C to 50°C) |
| Display Resolution |
0.1°F (0.1°C) |
| Display Options |
°F, °C, or Off. Set with Panel Button |
| Accuracy |
± 2°F (± 1°C) |
| Response Time |
20-30 minutes
(Case must Equilibrate with Environment) |
| Calibration Interval |
12 months, offset adjustment using temperature
standard at 50°F to 86°F (10°C to 30°C).
Full factory calibration available |
| Other Specifications |
| Method |
Dual Beam Absorption Infrared™ |
| Sample Method |
Diffusion or flow through (50 - 100 ml/min) |
| Warranty |
18 months parts and labor |
| Output |
| Analog |
CO2: 0-4 VDC, 1mV/ppm (4,000 ppm max)
Temperature:
0-4 VDC linear, 32°F to 104°F (0°C to 40°C) |
| Output Impedance |
100 Ohms |
| Wiring |
Connection Via RJ-45 to DB9 Serial Port Cable |
| Display |
LCD with independent CO2/ temp readings (panel
buttons set elevation, °F/°C, calibration functions) |
| Power Supply |
| Battery Type |
Four AA Alkaline Batteries (Not Included) |
| Battery Operation |
80 Hours (alkaline) |
| External |
6 VDC from external AC/DC adapter (included) |
| Power Requirements |
100 mA Peak, 20 mA average from 6V Certification |
Using the Telaire 7001 with a Data Logger
The Telaire 7001 Carbon Dioxide Monitor also can be
connected to a data logger with an external input to measure and record
carbon dioxide levels. An interface cable (#CABLE-CO2) connects
the Telaire 7001 to the HOBO data logger's external input.
The Data loggers are sold
separately.
Data Logging Notes: A HOBO data
logger can be used with the Telaire 7001 to log CO2 levels
over the range of 0 to 2500 ppm with 10 ppm resolution.
The HOBOware Lite software will display the data as voltage
readings from 0 to 2.5 volts, with every 0.001 volt corresponding
to 1 ppm. The Telaire 7001 can actually measure and display
values up to 10,000 ppm, but any value greater than 2500
ppm will output a voltage over the HOBO's 2.5 volt input
range. This will cause all channels to measure incorrectly
until the value drops back below 2500 ppm.
What is a good CO2 level?
There is no single 'good' CO2 level. CO2 is not directly harmful unless concentrations get
very high (i.e. above 15,000 ppm). An appropriate indoor CO2 level is determined
based on the ventilation requirements established by ASHRAE and the outside CO2 levels.
It is the difference of these two values which correlates to the ventilation rate. Take for
example an indoor level of 1100 ppm (measured while occupancy is steady). Assuming an outside
level of 400 ppm the difference between indoor and outdoor levels is 700 ppm. This equates to
15 cfm per person. For more information on this conversion or additional
examples use the Telaire Ventilation calculator (comes with the Telaire 7001).
MicroDAQ.com accepts
Visa, MasterCard and American Express
All prices are in U.S. Dollars.
No U.S. sales tax
|
