LOGiT Thermocouple Logger
Supco External Thermocouple and Internal Temperature Sensor Data Logger
 The LOGiT 2 channel thermocouple data logger has an internal temperature sensor and an external thermocouple probe. The logger can be used with J, K, E, T, R, and S type thermocouples. Basic features include: alarms, 1 second fast sampling rate, single point offset calibration and capacity to hold 10,750 samples per channel.
Included with each Temperature Logger
>> K-Type Thermocouple Probe with 3ft Cable
Required with each LOGiT Data Logger
>> LOGiT Software (#LLS or #LLSU)
>> 9 Volt Battery
NOTE: NIST Calibration is available.
Large Quantity Discounts Are Available!
Features Specifications Thermocouple Ranges
| Description |
Part Number |
Qty 1-9 |
Qty 10+ |
|
| LOGiT Thermocouple Logger |
LTC
|
$152.00 |
call |
 |
| Software and Interface Kit - 1 Required |
| LOGiT PC Software and Serial Interface Cable Kit (Includes Software, Serial Cable and LINT Interface) |
LLS
|
$74.00 |
call |
|
| LOGiT PC Software and USB Cable Kit (Includes Software, USB Cable and LINTU Interface) |
LLSU
|
$74.00 |
call |
|
| Battery - Required |
| 9 Volt Lithium battery, 1200 mAH |
U9VL-FP
|
$10.00 |
call |
|
| Standard NIST Calibration Service |
| Optional Accessories and Sensors |
| USB Serial Adapter |
Cable-USB232
|
$39.00 |
$35.00 |
|
| Keyspan USB 4-Port Serial Adapter |
USA-49WG
|
$149.00 |
call |
|
| Type K 24 Gauge 3 ft Long Thermocouple Probe (Limited Quantity - 1 Available) |
08515-01
|
$21.00 |
call |
|
| Type T 24 Gauge 3 ft Cable Length Thermocouple Probe (Limited Quantity - 11 Available) |
08515-02--U--
|
$21.00
$17.00 |
call |
|
LOGiT Thermocouple Logger Features
- 2 Channels: Internal Temperature and External Thermocouple Probe
- Store up to 21,500 Samples (10,750 per Channel)
- Sampling Rate of 1 Second to 18 Hours
- High and Low Alarms
- Single Point Offset Calibration through Software
- Requires LOGiT Software and 9 Volt Battery
LOGiT Thermocouple Logger Specifications
| Data Storage Capacity |
10,750 Samples for External and Internal Temperature Readings (21,500 Total) |
| Sampling Rate |
1 Second to 18 Hours |
| Alarms |
Over and Under Alarms |
| Temperature Range - Internal Sensor |
9V Alkaline Battery: 32°F to 140°F (0°C to 60°C)
9V Lithium Battery: -40°F to 150°F (-40°C to 65°C) |
| Temperature Range External Sensor |
Dependent on Thermocouple Type |
| Supplied Thermocouple Probe |
K type thermocouple probe with 3ft Cable
-40°F to 400°F (-40°C
to 204°C) |
| Supported Thermocouples |
J, K, E, T, R and S - Software Selectable |
| Thermocouple Connector |
Industry standard miniature universal connector |
| Internal Temperature Sensor Accuracy |
±2°F (1°C). For full accuracy allow
a few minutes of thermal setting after connecting
the thermocouple to the logger |
| Thermocouple Sensor Accuracy |
Thermocouple wire dependant. The supplied probe
is ±4°F (2°C) or 0.75% of reading whichever
is greater. |
| Internal Temperature Sensor Resolution |
0.1°F (0.05°C) |
| Thermocouple Sensor Resolution |
0.1°F (0.05°C) |
| Time Accuracy |
±100ppm @ 75°F |
| Operating Range |
32°F to 140°F (0°C to 60 °C) |
| Storage Temperature |
-40°F to 170°F (-40°C to 77°C) |
| Power Source |
9V Alkaline or Lithium Battery (Sold Separately) |
| Battery Life |
20 months using alkaline battery
40 months using lithium battery |
| Calibration |
Factory Calibrated. User single point offset calibration
available through software for both thermocouples
and ambient temperatures. |
| Dimensions |
3" x 2.5" x 1.1" (7.6cm x 6.4cm x 2.8cm) |
| Weight |
2.5oz (71g) |
Thermocouple Temperature Ranges
| Thermocouple Type |
Min |
Max |
| J |
-110°F (-79°C) |
1350°F (732°C) |
| K |
-220°F (-140°C) |
1900°F (1038°C) |
| E |
-75°F (-59°C) |
1040°F (560°C) |
| T |
-235°F (-148°C) |
660°F (349°C) |
| R |
32°F (0°C) |
2640°F (1449°C) |
| S |
32°F (0°C) |
2640°F (1449°C) |
Applications
- Refrigerators
- Greenhouses
- Florists
- Museums
MicroDAQ.com accepts
Visa, MasterCard and American Express
All prices are in U.S. Dollars.
No U.S. sales tax
|
