HOBO LCD Data Logger w/ External Input Probe
Onset LCD Data Logger Accepts External Sensor for Temperature or Temp/RH
 The HOBO LCD External Input Logger is a stand-alone, battery
operated data logger with a full-time digital display. Through
it's external probe input, it can record temperature only or
temperature and relative humidity (sensors sold separately).
The logger features storage of 65,000 samples, programmable start date and user set alarm
parameters, offload while logging
and programmable alarm trigger (open contact or closed contact)
for connecting to third-party alarm systems.
Required with the Data Logger
>> BoxCar Pro™ Software Kit
>> Temperature and Humidity Sensors
NOTE: NIST Calibration is available.
Large Quantity Discounts Are Available!
Features Specifications External Sensors
| Description |
Part Number |
Qty 1-9 |
Qty 10+ |
|
| HOBO LCD External Input Logger with full time digital display |
H14-002
|
$179.00 |
$167.00 |
 |
| Protective Case for H14-002 (optional) |
H14-CASE-4X
|
$79.00 |
$73.00 |
|
| Software Kit - Required |
| BoxCar Pro 4.3 Software and Serial Cable Kit |
BCP4.3-ON
|
$125.00 |
$118.00 |
|
| External Sensors - 1 Required |
| Temperature/RH Sensor with 6m Cable |
S-THA-M006
|
$145.00 |
call |
|
| Temperature/RH Sensor with 17m Cable |
S-THA-M017
|
$160.00 |
call |
|
| External Temperature Probe with 2m Cable |
L-TMA-M002
|
$50.00 |
$47.00 |
|
| External Temperature Probe with 6m Cable |
L-TMA-M006
|
$55.00 |
$51.00 |
|
| External Stainless Steel Temperature Probe |
L-TMB-M002
|
$99.00 |
$93.00 |
|
| Standard NIST Calibration Service |
| Optional Accessories |
| Extra Serial Interface Cable |
Cable-PC-3.5
|
$10.00 |
$9.00 |
|
| USB Serial Adapter |
Cable-USB232
|
$39.00 |
$35.00 |
|
| Keyspan USB 4-Port Serial Adapter |
USA-49WG
|
$149.00 |
call |
|
| 4 pack AAA Batteries |
AAA-ALK-BAT
|
$4.00 |
call |
|
Temperature Humidity Logger Features
- Log Temperature and Humidity with 1 External Sensor with Instant View of Readings on LCD Display
- User-Selectable Sampling Rate of 1 Second to 9 Hours
- External Probes for use in 0-100% intermittent condensing environments up to 30 °C (+86 °F) and non-condensing above +30 °C (86 °F)
- User-replaceable AAA Batteries with 1 Year Life
- Contact Relay output available for optional Remote Alarm (#ARA) and Auto Dialer (#AVD-45A).
- Optional Protective Case (#H14-CASE-4X) available for use in wet, condensing environments and dust-blown environments
- Requires BoxCar Pro Software and RS-232 Cable Kit (#BCP4.3-ON)
Temperature Humidity Logger Specifications
| Data Storage Capacity |
65,136 Samples/Readings |
| Sampling Rate |
1 Second to 9 Hours |
| Time Accuracy |
1 Minute per week at 20C (68F) |
| LCD |
Size: 33mm x 50.8mm (1.3" x 2.0")
Display: temperature, humidity, C or F, battery level, flashing alerts and remaining storage |
| Alarms |
Flashing Visual |
| Recording Mode |
Stop When Full or Wrap Around When Full |
| Contact Relay Output |
Selectable: Normally Closed (NC) or Normally Open (NO)
Contact Rating: 48 Volts DC, 1A Max
Contact Resistance: < 1 Ohm |
| Operating Range |
Temperature: -20°C to 50°C (-4°F to 1228°F)
Humidity: 0 to 95%, non-condensing |
| Battery Life |
Typically 1 Year |
| Battery |
3 AAA Alkaline Batteries (User Replaceable) |
| Standards Compliance |
CE |
| Weight |
170 g (6.0 oz) with batteries |
| Dimensions |
125mm x 92mm x 31mm (4.9" x 3.6" x 1.2") |
External Sensors Options for the Hobo LCD External Data Logger
External Temperature/RH Sensor*
|
|
Part Number: S-THA-M00x Series
- Range: -40° to 75°C (-40° to 167°F);
0-100%RH between 0° and 50°C (32° and 122°F)
- Sensor can be used in intermittent condensing environments
up to 30°C (86°F) and non-condensing environments above
30°C (86°F)
- Temp Accuracy: ±0.7° at 20°C(±1.3° at 68°F)
- RH Accuracy: ±3%RH over the range of 0° to 50°C (32° to 122°F);
±4% in condensing environments 0° to 30°C (32° to 86°F)
- Temperature: 8 minutes typical
- RH: 5 minutes typical in air flow of 2 m/s
- Drift: < 0.1°C(0.2°F) temp per year (typical); ±1%RH per year;
an additional reversible RH drift up to 3% can occur when average RH exceeds 70%
- Dimensions: 1.6cm x 10.2 cm (0.63" x 4")
- This is a smart sensor which can also be used with
the HOBO Weather Station
Data Logger
*Sensor requires protection from rain, splashing, mist and
airborne chemicals such as salt and ammonia
Water Resistant Temperature Probe
|
|
Part Number: L-TMA-M00x Series
- Range: -40° to 100°C (-40° to 212°F) in
air, and up to 50°C (122°F) in water
- Sensor tip and cable can be immersed in fresh water up to
50°C (122°F) for 1 year
- Accuracy: ±0.7° at 20°C(±1.3° at 68°F)
- Response Time to 90%: < 3 minutes typical in air
flow of 1m/s (2.2mph); 1 minute typical in stirred water
- Dimensions: 0.7cm x 2.5 cm (0.275" x 1")
Stainless Steel Temperature Probe
|
|
Part Number: L-TMB-M002
- Range: -40° to 100°C (-40° to 212°F)
- Sensor tip only is suitable for immersion
- Accuracy: ±0.7° at 20°C(±1.3° at 68°F)
- Response Time to 90%: < 3 minutes typical in air
flow of 1m/s (2.2mph); 15 seconds typical in stirred water
- Dimensions: 0.3cm x 10.2 cm (0.12" x 4")
Software and Accessories
MicroDAQ.com accepts
Visa, MasterCard and American Express
All prices are in U.S. Dollars.
No U.S. sales tax
|
