HOBO Indoor Temperature Data Logger
Onset Indoor Logger Measuring Temperature with Internal Sensor
 The HOBO Indoor Temperature Data Logger is a basic 1 channel temperature recorder. The logger will measure and record up to 7,943 temperature readings. The data logger features a user selectable sampling interval of 0.5 seconds to 9 hours,
programmable start time/date, nonvolatile EEPROM memory which retains data even if
battery fails, extendable internal temperature sensor and user-replaceable 1 year battery.
Included with Data Logger
>> Mounting Kit (Hook/Loop, Magnet, and Tape)
Required with the Data Logger
>> BoxCar Software Kit
NOTE: NIST Calibration is available.
Large Quantity Discounts Are Available!
Features Specifications
| Description |
Part Number |
Qty 1-9 |
Qty 10+ |
|
| HOBO Temperature Logger |
H08-001-02
|
$95.00 |
$90.00 |
 |
| Software Starter Kits - 1
Required |
| BoxCar Pro 4.3 Software and Serial Cable Kit |
BCP4.3-ON
|
$125.00 |
$118.00 |
|
| BoxCar 3.7 Software and Serial Cable Kit |
BC3.7
|
$55.00 |
$53.00 |
|
| Standard NIST Calibration Service |
| Optional Accessories |
| Extra/Replacement Batteries (pack of 5) - CR2032 lithium batteries |
HRB-Temp-5
|
$10.00 |
$8.00 |
|
| Extra Serial Interface Cable |
Cable-PC-3.5
|
$10.00 |
$9.00 |
|
| Glacier Clear Xtreme Protective Case (3.93" x 2.4" x 0.94") |
T1000.1
|
$9.00 |
call |
|
| Blue Xtreme Protective Case (3.93" x 2.4" x 0.94") |
T1000.4
|
$9.00 |
call |
|
| Keyspan USB 4-Port Serial Adapter |
USA-49WG
|
$149.00 |
call |
|
Indoor Temperature Data Logger Features
- Indoor Data Logger with Internal Temperature Sensor
- Internal Temperature Sensor on 4" Wire can Extend from Case
- Readout and Relaunch Logger with Optional HOBO Shuttle
- Programmable Start Time/Date
- Nonvolatile EEPROM Memory Retains Data Even If Battery Fails
- Blinking LED Light Confirms Operation
- Battery Level Indication at Launch
- Requires BoxCar Software Kit for Operation and Data Manipulation
Indoor Temperature Data Logger Specifications
| Data Storage Capacity |
7,943 8-bit Samples/Readings |
| Sampling Rate |
0.5 Second to 9 Hours (User Selectable) |
| Operating Range |
Temperature: -20°C to 70°C (-4°F to 158°F)
Humidity: 0 to 95% RH non-condensing, non-fogging |
| Operating Modes |
Stop When Full
Wrap-Around When Full |
| Temperature Sensor |
Range: -4°F to 158°F (-20°C to 70°C)
Range Outside Case: -40°F to 248°F (-40°C to 120°C)
Accuracy: ±1.27°F (±0.7°C) at +70°F
Resolution: 0.7°F (0.4°C) at +70°F
Response Time (Sensor Inside Case): 15 min.
Response Time (Sensor Outside Case): 1 min. |
| Drop Proof |
Up to 5 ft. |
| Time Accuracy |
±1 Minute per Week (±100 ppm at 20°C or 68°F) |
| Storage Range |
Temperature: -40°C to 75°C (-40°F to 167°F) |
| Battery |
3-Volt CR-2032 Lithium Battery (User Replaceable) |
| Battery Life |
Typically 1 Year |
| Standards Compliance |
CE |
| Weight |
29 grams (1 oz) |
| Dimensions |
61mm x 48mm x 20mm (2.4" x 1.9" x 0.8") |
MicroDAQ.com accepts
Visa, MasterCard and American Express
All prices are in U.S. Dollars.
No U.S. sales tax
|
