GL900 High Speed Isolated 8 Channel Logger
Graphtec Isolated 8-Channel Multifunction Data Logger
 The GL900 Data Logger is a high-speed 8 Channel recording device with isolated channels. The logger features a built-in web server, ftp server, LCD TFT Display, remote-monitoring, fast sampling rate of 10µs per channel and external storage using USB memory stick.
Included With Each Logger
>> User Manual & Quick Start Guide
>> GL900-APS Software
>> 24 Volts DC Power Supply
>> USB Cable
Optional Accessories Available
>> Humidity Sensor (#B-530)
>> 6 Hour Battery Pack (#B-517)
>> DC Power Cable (#B-514)
Features Specifications
NOTE: Large Quantity Discounts available!
| Description |
Part Number |
Qty 1-9 |
Qty 10+ |
|
| Graphtec High Speed Isolated Data Logger |
GL900
|
$3,995.00 |
call |
 |
| Optional Accessories |
| Graphtec Battery Pack |
B-517
|
$120.00 |
call |
|
| Cable: 4x logic inputs, 4x alarm outputs, 2 meters |
B-513
|
$80.00 |
call |
|
| DC Power cable, 2 meters, bare ends, for direct connection to DC power source |
B-514
|
$50.00 |
call |
|
| Graphtec Humidity Sensor |
B-530
|
$400.00 |
call |
|
| Graphtec BNC to BNC 6ft Cable |
RIC-112
|
$35.00 |
call |
|
| Graphtec BNC to Banana 6ft Cable |
RIC-113
|
$36.00 |
call |
|
| Graphtec BNC to Alligator Clips 6ft Cable |
RIC-114
|
$27.00 |
call |
|
High Speed Isolated Data Logger Features
- High-Speed Isolated 8 Channel Multifunction Data Logger
- Simultaneous Measurements of Voltage, Temperature, Humidity, Pulse and Logic
- Data Storage on USB Memory Sticks or Internal RAM for Samplings faster than 1 ms
- Wide 500 Volt Range Enables 100 to 240 Volts AC Power Supply Voltage Waveform Measurements
- Built-in 5.7" TFT LCD Display
- Remote Monitoring with Built-in Ethernet Web and FTP Server
- Includes Software, Power Supply and USB Cable
High Speed Isolated Data Logger Specifications
| Analog Inputs |
8 channels |
| External Input/Output |
Trigger input (1 channel), Logic input (4 channels) or Pulse input (4 channels), Alarm output (4 channels) |
| Sampling Interval |
10μs to 1 min |
| TIME/DIV |
10 ms/DIV to 24 hour/DIV |
| Timer Functions |
Date and time, daily cycle, hourly cycle |
| Trigger Functions |
Type |
Start: Data capture starts when a trigger is activated;
Stop: Data capture stops when a trigger is activated |
| Condition |
Start: Off, Input signal level (analog, logic/pulse), External*1
Stop: Off, Input signal level (analog, logic/pulse), External *1, Scheduled time |
| Combination |
Input Signal Level: Level OR, Level AND, Edge OR, Edge AND |
| Mode |
H (Rising), L (Falling), Window In*2, Window Out*2 |
| Alarm Setting Functions |
Rising, Falling, Window In*2, Window Out*2 |
| Alarm Output *1 |
Number of Channels: 4, Open collector output (5V, 10 kΩ pull-up resistance) |
| Pulse Input*1, *3 |
RPM Mode |
5 to 20 M RPM/F.S. (in steps of 1, 2, or 5) |
| Count Mode |
5 to 20 M C/F.S. (in steps of 1, 2, or 5) |
| Inst. Mode |
5 to 20 M C/F.S. (in steps of 1, 2, or 5) |
| Calculation Functions |
Statistical calculations *4: Average, Peak, Maximum, Minimum, RMS (2 calculations can be set simultaneously) |
| Other Functions |
Search function, annotation input function |
| PC Inteface |
Ethernet: 10BASE-T/100BASE-TX
USB:(High Speed) provided as standard |
| Ethernet Functions |
Web Server, FTP, NTP Client Functions |
| USB Function |
USB drive mode (File transfer and deletion from internal GL900 memory) |
| Internal Data Storage |
One million data points / Internal flash memory:Approx. 256 MB |
| External Data Storage |
USB memory slot (High speed supported) *5 |
| Display Functions |
Waveforms + digital values, enlarged waveforms, digital values + calculation results, X-Y |
| Display |
5.7" TFT color LCD |
| Operating Environment |
Temperature: 0C to 40C
Humidity: 5% to 85% RH (15C to 35C - Battery Power) |
| Withstand Voltage |
Between each input channel and GND: 1000 V p-p for one minute, between input terminals: 1000 Vp-p for one minute |
| Power Supply |
AC Adapter: 100 to 240 VAC, 50 to 60 Hz
DC Input: 8.5 to 24 Volts DC
Battery Pack: Optional (2 Battery Packs Should be Installed) |
| Power Consumption |
28 VA |
| Dimensions |
232 x 150 x 80 mm (W x H x D), approx. |
| Weight |
1.1 kg (excluding AC adapter and battery) |
| Vibration-tested Conditions |
Equivalent to automobile parts Type 1 Category A Classification |
Terminal block specifications
| Input Channels |
Fixed to 8 channels |
| Input Terminal Type |
Voltage: BNC connector
Temperature: M3 screw type terminal board *7 |
| Input Method |
All channels Isolated, Imbalanced Input, Simultaneous Sampling of all Channels |
| Measurement Ranges |
Voltage: 20, 50, 100, 200, 500 mV; 1, 2, 5, 10, 20, 50, 100, 200, 500 V F.S., 1-5 V F.S.
Thermocouples: K, J, E, T, R, S, B, N, W (WRe5-26)
Humidity: 0 to 100% (voltage 0 V to 1 V scaling conversion) * with B-530 (option) |
| Input Filter |
Off, Line, 5 Hz, 50 Hz, 500 Hz |
| A/D Converter |
16 bits (14 bits internally acknowledged) |
| Maximum Permissible Input Voltage |
Between Input Channel + and - Terminals:
20 mv to 1 V: 30 Vp-p
2 V to 500 V: 500 Vp-p
Between Input Channel Terminals: 60 Vp-p
Between Input Channel Terminal and GND Terminal: 60 Vp-p |
| Withstand Voltage |
Between Input Channel Terminal and GND Terminal: 1 minute at 1000 Vp-p
Between Input Channel Terminals: 1 minute at 1000 Vp-p |
Notes:
*1 Logic Alarm Cable (#B-513) is Required
*2 Cannot be Set for Logic Input
*3 Maximum Input Frequency: 50 kHz, Maximum Number of Counts: 15 M C
*4 In Real Time or when Between Cursors has been Specified (During Replay)
*5 1 File = 2 Gbytes (Depends on the USB Memory Stick Used)
*6 Please Install Two Battery Packs
*7 Connections made to both the BNC terminal and M3 Screw Terminal For The Same Channel
*8 Thermocouple Diameters T:0.32φ, others: 0.65φ
*9 Operating Temperature Range: -25°C to +80°C
Control Software Specifications
| Supported OS |
Windows 2000, Windows XP, Windows Vista (32-bit and 64-bit Versions) |
| Functions |
GL900 control, real-time data capture, data conversion |
| Setting Range |
Amp settings, data capture settings, trigger settings, alarm settings, other |
| Display Information |
Analog waveforms, logic waveforms, pulse waveforms, digital values |
| File Conversion |
Data between cursors, All data |
| 2-Screen Function (Zoom) |
Display of current and past data |
| Display of Statistics and History |
Display of maximum, minimum, and average values |
Humidity Sensor Specifications (#B-530)
| Measurement Range |
Temperature: -25 to 80C
Humidity: 0-100% RH |
| RH Accuracy |
3%RH (5 to 98%RH at 25C) |
| Response Time |
15 seconds (90% Rtesponse When Membrane Filter Installed) |
| Output |
0 to 1 Volt DC |
| Power Source |
5 to 16 Volts DC |
| Power Consumption |
Approx. 4 mA |
| Dimensions |
14mm x 80mm |
| Cable Length |
3 Meters |
Battery Pack Specifications (#B-517)
| Capacity |
7.2 Volts/2200 mAh |
| Battery Type |
Lithium Scondary Battery |
| Running Time |
Up to 2 Packs can be Mounted
When LCD is On:
Battery Pack x 1 (Brightness MAX): Approx. 2.5 Hours
Battery Pack x 1 (Brightness MIN): Approx. 3.0 Hours
Battery Pack x 2 (Brightness MAX): Approx. 5.0 Hours
Battery Pack x 2 (Brightness MIN): Approx. 6.0 Hours
When LCD is Off:
Battery Pack x 1: Approx. 4.5 Hours
Battery Pack x 2: Approx. 9.0 Hours
Note: When Capturing to Internal Memory at 1 s, sampling, 20 channel terminals, using new battery packs at 25C Environment.
Note: The Running Time Depends on the Operating Environment. |
| Charging Method |
Mount in the Main Unit |
| Time Required for Charging |
Battery Pack x 1: Approx. 4.0 Hours
Battery Pack x 2: Approx. 8.0 Hours |
| Switchover in the Case of a Power Failure |
Because the Battery is Used Together with the AC Adapter, the Power Supply will be Switched Automatically to the Battery in the Event of a Power Failure.
Note: The AC Adapter is the Primary Power Source. |
| Operating Environment |
15°C to 40°C |
| Other Functions |
>> When Battery is Running Low, File is Closed Automatically
(When Captured to Internal Memory or USB Memory)
>> Remaining Amount Indicator |
MicroDAQ.com accepts
Visa, MasterCard and American Express
All prices are in U.S. Dollars.
No U.S. sales tax
|
